HANA Floor


Hana Floor laminate flooring is a new generation of flooring concept utilizing a floating system of tongue and groove which saves you from gluing the product direct to the floor.
HANA Floor

100% Eucalyptus HDF

Project Flooring Specialist

  • Abrasion Layer

    the anti-abrasion layer perform as a protection layer for the decorative surface.

  • Decorative Layer

    The decorative layer is available in various.

  • HDF Eucalyptus Hardwood

    The HDF core board is made from Eucalyptus wood. It is highly resistant to water, moisture and insects.

  • Balance and Mute Layer

    To compensate for any slight unevenness in the basefloor. Slight sound absorber. Avoids moisture penetration and thus acts as a moisture barrier.

Warranty Coverage
  • Hana floor comes with a 15 years limited warranty for home use against wear, stains and colour fading.

  • Minor gapping (=0.5mm) without unlocking of pieces may occur and is not considered a defect.

  • Surface if considered worn through only if the area is more than 1 sqcm and the decorative layer has been exhaused until the core material is visible. Gloss reduction is not surface worn through.

  • Manufacturing defect should be reported before installation or soon after the purchase and it will be replaced.

  • Resistant to fading from exposure to direct sunlight or normal artifical light with the exception of natural ageing.

  • Resistant to normal household stain on the decorative surface.

Installation without glue
Advantages
  • Scratch Resistance
  • Heat Resistance
  • Cigarette Burns Resistance
  • Chemical Resistance
  • Abrasion Resistance
  • Moisture Resistance
  • Stain Resistance
  • UV Resistance
  • Eco Resistance
Design & Color
Technical Specification
Characteristics Standard Requirement Test Result
Abrasion Resistance EN13329:2006 ≥ 2,000 2,700
Av.Thickness EN13329.2006 8.0 ± 0.5 8.05
Stain Resistance EN13329:2006 5 (Group 1 & 2) 5
4 (Group 3) 5
Length of the surface layer EN13329.2006 1,205 ± 0.5 mm 1,205
Av. Width of the surface layer EN13329:2006 192 ± 0,1 mm 192.01
Squareness EN13329.2006 ≤ 0.20 mm 0.06
Straightness EN13329:2006 ≤ 0.30 mm/m 0.08
Flatness (f w,concave) EN13329.2006 ≤ 0.15 % 0.07
Flatness (f w, convex) EN13329:2006 ≤ 0.20 % 0.09
Flatness (f I, concave) EN13329.2006 ≤ 0.50 %
Flatness (f I, convex) EN13329:2006 ≤1.00 % 0.18
Av. Openings between elements EN13329.2006 ≤ 0.15 mm 0.04
Max. Openings between elements EN13329:2006 ≤ 0.20 mm 0.08
Av. Height difference between EN13329.2006 ≤ 0.10 mm 0.03
Max. Height difference between EN13329:2006 ≤ 0.15mm 0.08
Surface Soundness EN13329:2006 ≥ 1.0 N/mm2 1.3
Thickness swelling EN13329.2006 18% 12