Radiant

-
Abrasion Layer
the anti-abrasion layer perform as a protection layer for the decorative surface.
-
Decorative Layer
The decorative layer is available in various.
-
HDF Eucalyptus Hardwood
The HDF core board is made from Eucalyptus wood. It is highly resistant to water, moisture and insects.
-
Balance and Mute Layer
To compensate for any slight unevenness in the basefloor. Slight sound absorber. Avoids moisture penetration and thus acts as a moisture barrier.
Warranty Coverage
-
Radiant floor comes with a 10 years limited guarantee for home use against wear, stains and colour fading.
-
Minor gapping (=0.5mm) without unlocking of pieces may occur and is not considered a defect.
-
Resistant to fading from exposure to direct sunlight or normal artifical light with the exception of natural ageing.
-
Resistant to normal household stain on the decorative surface.
-
Manufacturing defect should be reported before installation or soon after the purchase and it will be replaced.
-
We extend the warraty for 5 years for termite attack, if any defect caused by termite, we will assure to change the floorboard accordingly.
-
Surface if considered worn through only if the area is more than 1 sqcm and the decorative layer has beenexhaused until the core material is visible. Gloss reduction is not surface worn through.
Installation without glue
Advantages
-
Scratch Resistance
-
Heat Resistance
-
Cigarette Burns Resistance
-
Chemical Resistance
-
Abrasion Resistance
-
Moisture Resistance
-
Stain Resistance
-
UV Resistance
-
Eco Resistance
Technical Specification
Characteristics | Standard | Requirement | Test Result |
---|---|---|---|
Abrasion Resistance | EN13329:2006 | ≥ 1,500 | 1,500 |
Av.Thickness | EN13329.2006 | 8.0 ± 0.5 | 8.05 |
Stain Resistance | EN13329:2006 | 5 (Group 1 & 2) | 5 |
4 (Group 3) | 5 | ||
Length of the surface layer | EN13329.2006 | 1,205 ± 0.5 mm | 1,205 |
Av. Width of the surface layer | EN13329:2006 | 192 ± 0,1 mm | 192.01 |
Squareness | EN13329.2006 | ≤ 0.20 mm | 0.06 |
Straightness | EN13329:2006 | ≤ 0.30 mm/m | 0.08 |
Flatness (f w,concave) | EN13329.2006 | ≤ 0.15 % | 0.07 |
Flatness (f w, convex) | EN13329:2006 | ≤ 0.20 % | 0.09 |
Flatness (f I, concave) | EN13329.2006 | ≤ 0.50 % | – |
Flatness (f I, convex) | EN13329:2006 | ≤1.00 % | 0.18 |
Av. Openings between elements | EN13329.2006 | ≤ 0.15 mm | 0.04 |
Max. Openings between elements | EN13329:2006 | ≤ 0.20 mm | 0.08 |
Av. Height difference between | EN13329.2006 | ≤ 0.10 mm | 0.03 |
Max. Height difference between | EN13329:2006 | ≤ 0.15mm | 0.08 |
Surface Soundness | EN13329:2006 | ≥ 1.0 N/mm2 | 1.3 |
Thickness swelling | EN13329.2006 | 18% | 12 |